Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/sezerhay/yorcim.com/wp-content/plugins/qtranslate-x/qtranslate_frontend.php on line 497

Warning: Parameter 2 to qtranxf_postsFilter() expected to be a reference, value given in /home/sezerhay/yorcim.com/wp-includes/class-wp-hook.php on line 286
Yorcim – Yorçim

Author Archive Yorcim


What is Siliceous Sand?

Also known as silicon dioxide (SiO2), is a compound of high nature, with a wide range of uses, in the form of free quartz or in association with silicates. Silica is a colorless, tasteless and physiologically inert substance. Insoluble in water, many acids or alkalis. However, hydrogen is dissolved in fluoride and very slowly in hot phosphoric acid.

The silica crystals are hard and transparent and melt at about 1600 ° C. Silica is found in nature with various crystal structure. For example, quartz, hexagonal; cristobalite, tetragonal and tridimide; Silica combines with some metal oxides to form precious stones. Silica; glass, water glass, ceramic, glaze, refractory materials, crucible, sandpaper, concrete, mortar, silicon carbide and other silicon compounds. The silica in powder form is used as a filler in heat insulation in resin, pharmacy, cosmetic, and in the paper industry.

Silicosis: It is a lung disease that occurs mostly by workers working in mines and quarries, potters and inhalation of silica powders. Symptoms occur within 3-5 years or 20 years after the powder density at the workplace. The silica particles with a diameter of less than about 5 microns reach the bronchioles in the lungs. It is held here by the macrophages in the air sacs. Later, by the disintegration of macrophases and the release of enzymes, tubers are formed in the lung tissue. Thus, the flexibility of the lungs decreases and breathing difficulties occur. The main symptoms are cough, bloody sputum, and difficulty breathing.

Silica sand contains SiO2. Silicium and O2 are among the most common elements in the world and together form one of the 3 minerals in the rock form in the world. Silica is found in three main crystal forms. It is mostly found in mineral quartz form.

quartzite; In general, quartz sand grains, a cement composed of silici are connected to each other with a very strong bond is a rock type. The chemical composition of quartzite is SiO2 such as quartz, sandstone (quartz sand) and quartz sand; It can be found.

Quartzite resistance is a very strong and corrosive rock. Therefore, it is quite difficult and expensive to grind. Quartzites can be used in the glass and ceramic industry if the SiO2 content is high and the iron content is less than 0.4%. These ores are very resistant to temperature and chemical effects. Because of this feature is used in different branches of industry.

Silica sand is a type of sand that is found on the river and lake sides in the places where the underground resources are usually found. Chemical Icon S02.It is generally used as a molding material in foundries, however, in the production of jambs, silica sand is mixed with various components to make it into mortar and to be a styrofoam coating. Zircon, chromite, olivine and milled ceramic minerals are used in certain proportions in the casting sand.

It is one of the most important features of the facade cladding that it is preferable to have silica sand paintable and it can be easily accepted by paint on the jamb materials and it can be easily dyed with water-based paint.


Silis Sand Production Facilities

Get the best price offer now.


Leader is “Yorçim”

Our Services are our references.


Lawn Construction

Important Information about Carpet Site Construction

People who want to get important information about the construction of the carpet field, first of all need to learn the types of carpet areas. Accordingly, we would like to give you some information from our experts in order to make it easier for you to know what kind of carpet areas are made and what the conditions are.

What are the varieties of the carpet field?

Outdoor carpet pitches,
Indoor carpet pitches,
Professional artificial turf carpet pitches
are divided into three main groups.

1- Open Carpet Field Construction
One of the sports fields that are frequently preferred especially in summer months is open carpet areas. Around 6-7m in height and 3.5mm thick pvc coated wire mesh surrounded by special carpet area lighting is used in these areas in the night hours are provided. Carpet lighting can be preferred as 400W halide projector or 150-200W LED projector. On outdoor carpet areas, 55mm artificial turf is preferred.

2- Indoor Carpet Field Construction
It is an indoor sports area that you can prefer in the winter months to protect you from snow, rain or cold. You can see that the wind will not pass in these areas where the carpet is completely covered.

What are the indoor carpet pitches?

Indoor covered carpet field construction,
Sheet metal covered indoor carpet field construction,
PVC covered indoor carpet pitch construction
In order to cover the area, sheet metal coating, PVC coating or tarpaulin can be preferred. The most affordable and widely used indoor carpet pitch type canvas stands as closed carpet pitches. However, we recommend the construction of covered area of ​​sheet metal covered sheet in snowy areas. Steel construction should be used for indoor carpet area construction. In order to reduce the cost, the risk of collapsing when using less and weaker material than required in steel construction.

3- Professional Artificial Grass Carpet
Professional artificial turf carpet nizami applied to football fields. 55mm or 60mm artificial models are preferred as artificial turf. Official football competitions can be played in these areas. For this, Fifa 1 Star and Fifa 2 Star certificate must be obtained. In this type of floor, twice the amount of granules is used.

What are the Features of Top Quality Synthetic Grass Soil?

60mm Monofilament carpet is used,
Monofilament carpet should also be vertebrate,
Shock pads are put under carpet instead of felt.
The amount of granules should be around 14-15kg / m2,
Green or gray EPDM granules used
Some Fifa 2 Star applications may require a shock pad assembly under the carpet. This is the highest level of synthetic grass floor that can be built on such a floor. The features mentioned above are generally the features that are seen in Fifa 2 Star applications.

Artificial Turf Selection in Carpet Field Construction
One of the most important factors in the preparation of the ground is the selection of the ground. After making the right choice, construction works will be started.

However, you must decide on the artificial grass you choose according to some criteria. Artificial grasses can be selected from single or double color, monofilament single color or double color models in standard fibrile. You can choose from a variety of pile sizes in dozens of models. We offer the services such as touching, placing, making homogenous sand and granule fillings and brushing of the surface according to the field dimensions.

What are the best selling carpet pitch artificial turf models?

DuoGrass double color fibrile 55mm synthetic grass,
Advantage Grass double color monofilament 55mm synthetic grass,
LSR Fibrile single color football synthetic grass 55mm
You can contact us to find out the types of artificial turf which will be used in indoor and outdoor carpet field construction and prices of these services. Different prices are determined according to yarn type, weaving density and pile size for artificial turf produced for use in sports fields.

Touching a special carpet according to the wishes of the customers will be among the other factors that will affect the prices directly. For special weaving, it is necessary to order an order over a certain quantity.

Carpet Field Artificial Grass Care
Synthetic grass floor needs periodic maintenance after the completion of the carpet field construction. This care is an important factor that extends the life of the synthetic grass floor, although dense and often not up to natural grass.

How to make synthetic lawn care for carpet field?

  • Periodic brushing of artificial turf floor (motor brushing or manual),
    Addition of granules less than 6 months,
    Watering should be done after sunset on hot days,
    Foreign objects such as glass pieces, cigarette butts, branches, stones, chewing gum should be cleaned every few weeks.

You can contact us to get more detailed information from this page which is a reference for everyone who wants to get important information about the field construction.


Gravel, gravel, sand

Gravel, pebble and sand are non-organic materials that are divided into specific grain classes, also called aggregates, divided into two parts as crushing and natural. This material is used extensively in concrete, light concrete production, road filling and coating, construction plaster.

The sand as a building material is a loose textured clastic sediment with a grain size of 0.063-2 mm. The grain size is between 0.063-0.25 mm and the sand is between 1-2-1.2 mm. It is a mixture of sand quartz, feldspar grains, rock residues, mica and glaucony. The surface properties, hardness, proportion of clay and silt fractions of the grains are important factors determining the properties of sand. Besides, artificial sand (stone flour) obtained by breaking and classification of limestone (CaCO2) originated rocks is also widely used. There are significant standard differences and nomenclature differences between countries and regions depending on their origin, production patterns and grain sizes.

The crushed aggregates, which are called gravel and natural raw materials, are between 2-128 mm. Fine aggregates with a particle size of 2-8 mm and coarse aggregates between 8-32 mm. Due to the existence of large geological structures that can be used for sand, gravel and crushed stone reserves, there are reserves that can meet the needs for many years. Due to the fact that it can be provided in a wide and wide area throughout the country, there is no problem about reserve. However, the necessity of keeping the unit costs low due to the usage area restricts the reserve. The transportation costs for the aggregate, which are far from the consumption areas, have an important place within the unit costs. In addition to being away from consumption areas, land use limitations and environmental protection problems limit the use of existing reserves. At the moment of urbanization, bottlenecks in the supply of sand, gravel and chippings occur due to production constraints in the immediate vicinity of big cities.

Although there is no healthy information about the quarries in our country, it is possible to reach the data explained by the State Institute of Statistics. In addition to this, it is possible to make some estimations based on the usage areas in general and the production and consumption values ​​made in this way reflect the actual consumption values. Moving from the total concrete production from the approach used in the estimation of large aggregate consumption amounts gives very reliable results. For this purpose, it is assumed that 1 m3 of concrete is consumed per year per person.


Sand Usage Areas

Silica Sand and Usage Areas
Silica sand is a silicon and gaseous oxygen-containing substance. Silicon and 02 are abundant elements in the universe. However, it also forms the silica. Silica 3 is in the form of the main crystal. The most quartz form is present in these.

quartzite; quartz sand is a rock that is formed by a solid bonding of cement from a silica.

Quartzite is a rock with very strong, resistant and abrasive properties. For this reason, grinding is extremely costly. Quartzite production is preferred after quartz sand, sandstone and quartz with the same chemical properties.

quartzite is one of the hardest minerals found in nature. Therefore, it can be used safely in construction and building chemical materials production. These substances are very resistant to heat. Therefore, it is used in different branches of industries.

Application Areas of Silica Sand
The first one of the application areas of silica sand is pipe manufacturing. Glass fiber is used together with glass wool resin to make the pipe durable.

Silica Sand treatment plants.

Silica sand is the second one of the areas of use in treatment facilities. It is involved in filtering and purification of water and other liquids.

Silica Sand Casting Industry


Sand Types

Construction Sands
As Yorçim, we are producing high quality standards with TSE certificate in our advanced technological facilities, which have all kinds of construction sand and filler material needed at every moment of the construction phase of the reinforced concrete structures in the underground and above ground construction facilities. We produce raw materials of the construction sands that we produce using environmentally friendly, nature-friendly production techniques in the form of natural aggregate, which we own, from the quarries in our land close to five hundred acres and deliver it to our production facilities.

The cullet (natural aggregate) extracted from our quarries; After being shipped from the raw material field to the production facilities, we first pass the washing plant with pressurized water from the pre-selection in our mill plant. The sieved and washed material then immediately passes to the steel bar mill. As a result of the rotation of the mill, the steel bars are compressed and the natural aggregate material is milled and also washed in the mill. The milled material in the mill with steel rods is also washed again at the mill outlet (3rd and final washing) and classified into the size of the mill plant and the concrete slab flows into the field chamber. Finally, the materials taken from the reinforced concrete partitions are stocked for sale to be delivered to the relevant stock areas and ready for sale.

In the construction sand produced by TSE standards, the silica ratio is as high as 99% and the pollution is much lower than the acceptable level since the entrance to the mill plant is subjected to washing with three times pressurized water during the production and exit periods of the mill plant. These sands are used in the construction of concrete, fine or coarse plaster, as an input in the construction of alum material. Due to its high quality (99% silica content) and advanced technology production process, our products are especially demanded in the market.

We produce construction sands; the grain size (mm) is the name of the host.

Product types;

Sand 01 mm
Sand 02 mm
Sand 03 mm
Sand 04 mm
Sand 05 mm
Sand 06 mm

Call Now ButtonHemen Ara